DynaShield® ADSi Surge Suppression
With the DynaShield
® ADSi series surge protection devices, companies can trust their mission-critical and expensive electronic equipment is protected. Since downtime can result in safety hazards and monetary loss, the ADSi has become a vital component upon which companies rely.
-This full-featured SPD protects all phases and modes against transient surges. With the filter option, it decreases noise by 55 dB. No other SPD offers as much power quality protection.
- The ADSi series has easy-to-service, replaceable modules. The unit also has many options including advance EMI/Noise filtering, resettable surge counter, and a wide selection of power quality meters making it the most versatile SPD on the market.
Listed to Type 1 and Type 2
200 kAIC rated fuse disconnect
Best filter options on the market: advanced filtering targets most common transient surges and damaging medium frequency noise
Copper bus connected surge modules
10 modes of protection
Dual surge counter options: continuous and resettable
Smart monitoring options
Dual NO/NC form C dry contacts for remote monitoring and control
Individually fused and protected MOV technology
NEMA 4 & NEMA 12 painted steel enclosure
10-year standard warranty
DynaShield Applications
- ALLTEC’s Protection Pyramid depends on DynaShield® products to support its comprehensive facility framework. The second tier of protection diminishes the significance of random high-energy, short-duration electrical power transients through properly installed surge protective devices. These occurrences are typically caused by atmospheric phenomena (such as lightning strikes), utility switching, inductive loads, and internally generated overvoltages.
- You can view typical installation locations in the application maps to the right by locating the numbers 5 and 6.
Specifications
Model | ADSi-080 | ADSi-160 | ADSi-240 |
Connection Type | Parallel Connected | ||
Agency Listings | Listed to UL 1449 4th Edition, Noise Filtering UL 1283 | ||
Protection Modes | Line-to-neutral, Line-to-ground, Line-to-line, Neutral-to-ground | ||
Operating Frequency Range | 50–60 Hz | ||
Maximum Surge Current | 160 kA per phase | 320 kA per phase | 480 kA per phase |
50 ohm EMI/RFI Attenuation | 3 kHz / 1 MHz UL 1283–45 dB | ||
Response Time | < 1 ns | ||
Status Indication | Green LED (Working), Red LED (Alarm), Audible Alarm | ||
Enclosure Protection Level | NEMA 12, Painted Steel | ||
Dimensions (H x W X D) | 10″ x 8″ x 6″ (Optional 15.5” x 12” x 6.2”) | ||
Weight (Maximum) | Up to 65 lbs | ||
Wire Connections | Lugs up to 2 AWG | ||
Operating Temperature | -40° F to +149° F (-40° C to + 65° C) | ||
Operating Humidity | 5% to 95% non-condensing |
Please refer to similar products...HERE
You will receive a quote from us as soon as possible..
Have 0 comment, evaluate about DynaShield® ADSi Surge Suppression
TVAdministratorsAdministrators