DynaShield® ADSc Surge Suppression
ALLTEC’s fully-featured ADSc models are high-performance surge protectors designed specifically for critical panel locations. The ADSc incorporates high-energy MOVs with the best performing EMI filter on the market to protect against transients originating induced lightning strikes, utility switching, and facility power noise.
LED fault indicators for each phase provide real-time diagnostics. Options include alarm with red LED and dual Form C dry contacts for remote indication and an audible alarm.
The ADSc Series is available for all voltages and configurations up to 600V. Housed in a rugged NEMA 12 enclosure, these devices are suitable for indoor applications.
10 modes of protection
200 kAIC fault current rating
Advanced EMI/RFI noise filtering (-45 dB) 3 kHz to 1 MHz
Optional 30 amp fuse allows direct connect to power bus
Resettable surge counter option
Listed to UL 1449 4th edition
10-year standard warranty
DynaShield Applications
- The second tier of protection diminishes the significance of random high-energy, short-duration electrical power transients through properly installed surge protective devices. These occurrences are typically caused by atmospheric phenomena (such as lightning strikes), utility switching, inductive loads, and internally generated overvoltages.
- You can view typical installation locations in the application maps to the right by locating the numbers 5 and 6.
.png "DynaShield® ADSc Surge Suppression")
Specifications
| Model | ADSc-080 | ADSc-100 | ADSc-200 |
| Connection Type | Parallel Connected | ||
| Agency Listings | Listed to UL 1449 4th Edition and UL 1283 | ||
| Protection Modes | Line-to-neutral, Line-to-ground, Line-to-line, Neutral-to-ground | ||
| Operating Frequency Range | 50–60 Hz | ||
| Maximum Surge Current | 160 kA per phase | 200 kA per phase | 400 kA per phase |
| Response Time | < 1 ns | ||
| Status Indication | Green LED | ||
| Enclosure Protection Level | NEMA 12, Painted Steel | ||
| Dimensions (H x W X D) | 10″ x 8″ x 6″ (Optional 15.5” x 12” x 6.2”) | ||
| Weight (Maximum) |
Up to 25 lbs |
||
| Wire Connections | Standard #10 AWG | ||
| Operating Temperature | -40° F to +149° F (-40° C to +65° C) | ||
| Operating Humidity | 5% to 95% non-condensing | ||
ADSc-080
- These high performance ADSc models are full featured surge protectors specifically designed for critical panel locations. The ADSc incorporates high-energy MOVs with the best performing EMI filter on the market to provide protection against transients originating induced lightning strikes, utility switching, and facility power noise.
- Real-time diagnostics include LED fault indicators for each phase as well as an optional alarm that includes red LED, dual form C dry contacts for remote indication, and an audible alarm. The ADSc series is available for all voltages and configurations up to 600 V. Housed in a rugged NEMA 12 enclosure, these devices are suitable for indoor applications.
.png "DynaShield® ADSc Surge Suppression")
Applications Include:
Main Service Entrance
Distribution Equipment
Branch Panels
Motor Control Centers
ADSc-100
These high performance ADSc models are full featured surge protectors specifically designed for critical panel locations. The ADSc incorporates high-energy MOVs with the best performing EMI filter on the market to provide protection against transients originating induced lightning strikes, utility switching, and facility power noise.
Real-time diagnostics include LED fault indicators for each phase as well as an optional alarm that includes red LED, dual form C dry contacts for remote indication, and an audible alarm. The ADSc series is available for all voltages and configurations up to 600 V. Housed in a rugged NEMA 12 enclosure, these devices are suitable for indoor applications.
.png "DynaShield® ADSc Surge Suppression")
Applications Include:
Main Service Entrance
Distribution Equipment
Branch Panels
Motor Control Centers
ADSc-200
- These high performance ADSc models are full featured surge protectors specifically designed for critical panel locations. The ADSc incorporates high-energy MOVs with the best performing EMI filter on the market to provide protection against transients originating induced lightning strikes, utility switching, and facility power noise.
- Real-time diagnostics include LED fault indicators for each phase as well as an optional alarm that includes red LED, dual form C dry contacts for remote indication, and an audible alarm. The ADSc series is available for all voltages and configurations up to 600 V. Housed in a rugged NEMA 12 enclosure, these devices are suitable for indoor applications.
.png "DynaShield® ADSc Surge Suppression")
Applications Include:
Main Service Entrance
Distribution Equipment
Branch Panels
Motor Control Centers
Please refer to similar products...HERE
You will receive a quote from us as soon as possible..
Related products
Have 0 comment, evaluate about DynaShield® ADSc Surge Suppression
TVAdministratorsAdministrators