Combination arrester V50 1-pole NPE 150 V

Manufacture: OBO
Product code: V50 1-pole NPE 150 V

Lightning current combination arrester, type 1+2, Item no. 5093452 | EAN 4012196398676, New 100%, contact 0917911114

Zalo

Consulting hotline: 0944934114
Product information

Combination arrester V50 1-pole + NPE 150 V

Combination arrester V50 1-pole + NPE 150 V

• For lightning current equipotential bonding to VDE 0185-305 (IEC 62305)

• Lightning current arresting capacity of 12.5 kA (10/350) per pole and up to 50 kA (10/350) in total

• Modular, plug-in arrester with cut-off unit and visual status display

• Locking mechanism with vibration protection and voltage keying

• Plastic to UL 94 V-0

• The remote signalling (FS) variants have a potential-free changeover contact for remote signalling

- Application: Lightning current equipotential bonding for buildings of class III and IV.

Complete = Plug-in arrester and base

Connectivity options

SPD to EN 61643-11 Type 1+2
SPD to IEC 61643-11 Class I+II
SPD to UL 1449 Type 4
Nominal voltage AC (50/60 Hz) 120 V
Maximum continuous voltage AC 150 V
Nominal discharge current (8/20 µs) 30 kA
Maximum discharge current (8/20 μs) 50 kA
Lightning surge current (10/350 μs) 12.5 kA
Lightning surge current (10/350) 25 kA
Arrester surge current (8/20 µs) [total 80 kA
Protection level [L-N] 0.8 kV
Combined voltage protection level [L-PE] 2.1 kV
Residual voltage [L-N] @ 1 kA 0,4 kV
Residual voltage [L-N] @ 5 kA 0,5 kV
Max. mains-side overcurrent protection 160 A gL/gG
Short-circuit withstand for max. mains-side overcurrent protection 50 kA eff
Operating temperature range -40 - +80 °C
Protection rating IP20
Approvals UL
Switching power AC 230 V; 0,5 A
Switching power DC 230 V; 0,1 A / 75 V; 0,5 A
Connection cross-section, FM terminals 0,5 - 1,5 mm²
Connection cross-section, FM terminals 21 - 16 AWG
Conductor cross-section, flexible (fine-wire) 1.5 - 35 mm²
Conductor cross-section, rigid (single wire/multi-wire) 1.5 - 35 mm²
Conductor cross-section, flexible (fine-wire) 16 - 2 AWG
Conductor cross-section, rigid (single wire/multi-wire) 16 - 2 AWG
TOV voltage [L-N] ‒ fail safe mode ‒ 120 min. 230 V
TOV voltage [L-N] ‒ withstand mode ‒ 5 s 175 V
TOV voltage [N-PE] ‒ withstand mode ‒ 200 ms 1200 V

Dimensions

Installation dimensions (LxWxH) 90x35,6x78,5 mm
Size 2 part units
Minimum distance 1.5 mm

Please refer to unburnt equipment provided by Dong Nam... HERE

You can refer to the manufacturer for more information....HERE

Xem thêm
Rút gọn
Frequently asked questions

You will receive a quote from us as soon as possible..

Have 0 comment, evaluate about Combination arrester V50 1-pole NPE 150 V

Welcome, honored guests. Please leave a comment, we will respond soon
Reply.
Sender information
Comment
Click here to rate
Sender information
Product portfolio
0.14277 sec| 4340.922 kb