CO2 Fire Extinguisher KM CE,Eversafe Malaysia Fire Extinguisher
Eversafe CO2 (KM,CE) Fire Extinguisher ⭐
✅ Model : MCO-10,MCO-20,MCO-10T ⭐
✅ Portable Carbon Dioxide Trolley Fire Extinguisher is certified to BS EN 1866 and manufactured according to BS EN 1866. The quality system is ISO 9001 certified. It is designed to protect people and property in high-risk areas where there is always the potential for large-scale fires. Mobile devices have significantly greater extinguishing capacity than portable extinguishers, and are highly maneuverable and can be easily operated by only one person. The EVERSAFE portable Carbon Dioxide Fire Extinguisher provides maximum protection against Class B (flammable liquids) and Class C (flammable gas) fires. CO2 does not conduct electricity and is therefore particularly effective against fires in factories and electrical equipment. After use, the carbon dioxide disperses without leaving any pollution or corrosive residue. However, if used in a confined area, normal ventilation procedures should be followed.
Advantages
Designed to protect people and property in high-risk areas where large-scale fires occur.
- Recommended for airports, ships, chemical plants, offshore platforms, heavy manufacturing area garages, refineries, warehouses, power plants, etc.
- Significantly greater extinguishing capacity.
- Highly maneuverable and can be easily operated by a single person. Tested and certified to BS EN1866, Pressure Equipment Directive (PED) and Marine Equipment Directive (MED).
.png "Bình cứu hoả CO2 (KM,CE),Thiết bị chữa cháy Eversafe Malaysia")
Specifications
| Model | MCO-10 | MCO-20 | MCO-10T |
| Capacity | 10kg | 20kg | 20kg x 2 |
| Type | Single bottle | Double type 2 bottles | |
| Fire extinguisher | Carbon Dioxit (CO²) | ||
| Standard | CE Marked Brass Screw Down Valve with Safety Valve | ||
| Connet | 1 ″ BS 341 | ||
| Drain hose | High pressure discharge | ||
| Inner diameter x length | 9,5mm x 6 m | ||
| Exhaust whistle | Plastic with on/off valve | ||
| Cylinder parameters | EN1964 Part 1 TPED | EN1964 Part 1 TPED | EN1964 Part 1 TPED |
| Diameter (mm) | 156 | 204 | 156 |
| Height (mm) | 615 | 815 | 615 |
| Push frame | Steel | ||
| Weight(mm) | 1065 | 1210 | 1040 |
| Width (mm) | 465 | 567 | 515 |
| Deep (mm) | 860 | 1260 | 1050 |
| Average weight (kg) | 33 | 80 | 50 |
| Average weight +CO2 | 43 | 100 | 70 |
| Surface paint | RAL 3000 Flame Red Powder Powder Powder | ||
| Wheel diameter | 300 mm | ||
| Working temperature | -20 ° C to + 60 ° C | ||
| Working pressure (20 ° C) | 56 bar | ||
| Test pressure | 250 bar | ||
| Discharge time (seconds) | 53 | 61 | 83 |
| Discharge range (m) | 4 | ||
| Fire Rating | 70B C | 89B C | 89B C |
| Production certificate | BS EN 1866: 2007 | ||
You will receive a quote from us as soon as possible..
Related products
Have 0 comment, evaluate about CO2 Fire Extinguisher KM CE,Eversafe Malaysia Fire Extinguisher
TVAdministratorsAdministrators