Clean Agent Fire Suppression Systems FM-200™ HFC-227ea
Kidde Fire Systems offers versatile FM-200
™ (HFC-227ea) and 3M
™ Novec
™ 1230 clean agent fire suppression systems that equally provide a total flood fire protection solution to protect valuable assets in occupied areas
Descriptions Clean Agent Fire Suppression Systems FM-200™ HFC-227ea
An innovative advanced delivery clean agent fire suppression system developed to provide fire protection for larger enclosures requiring longer agent flow distances.
With the patented-technology of “piston flow”, the ADS system is capable of delivering greater mass flow rates (2.5 to 3 times faster) than a standard clean agent fire suppression system. This innovation allows networking of longer pipe runs in complex configurations with smaller pipe sizes for protection of larger hazard areas.
These characteristics allow the ADS System to be a virtual “drop-in” replacement for existing Halon 1301 gas fire suppression systems. Most installations will require only new nozzles and agent storage cylinders and can use most of the existing pipework—providing substantial savings when retrofitting existing systems.
.png "Clean Agent Fire Suppression Systems FM-200™ HFC-227ea")
.png "Clean Agent Fire Suppression Systems FM-200™ HFC-227ea")
Technical Specifications Clean Agent Fire Suppression Systems FM-200™ HFC-227ea
Offers higher cylinder fill capacities for more efficient agent storage.
Increased agent flow rates and distances provide better coverage for larger hazard areas.
Smaller piping diameter results in installation cost savings.
Discharges the suppression agent the hazard in seconds.
Listing & Approvals
UL Listed
EPA Listed Agent
FM Approved
USCG Approved
ECS™ 360 psi Clean Agent Fire Suppression Systems
.png "Clean Agent Fire Suppression Systems FM-200™ HFC-227ea")
ECS Clean Agent Fire Suppression Systems are the preferred fire suppression solution for facilities that cannot afford the downtime associated with a fire or typical water-based fire suppression systems. FM-200™ and 3M™ Novec™ 1230 Fire Protection Fluid Clean Agent systems extinguish a fire quickly by breaking down the molecular structure of the fire. The suppression agents do not harm the equipment or personnel in the protected room or cause a mess to clean up afterward.
Kidde Fire Systems ECS Clean Agents offer rapid-fire extinguishment, suppressing fires within seconds of the agent being discharged the protected area. The agents are ventilated out of the space and do not leave behind a residue to be cleaned up, allowing your facility to get back to work immediately.
ECS Clean Agents are non-toxic when used in compliance with NFPA Standard 2001. They do not impair breathing or obscure vision in an emergency situation, providing an added measure of safety for personnel.
Technical Specifications Clean Agent Fire Suppression Systems FM-200™ HFC-227ea
Engineered system providing a fast acting discharge in seconds
Offers fully-developed, flexible design limits to fit any application environment
Easy to design using our engineered series software
Listing & Approvals
UL Listed
ULC Listed
FM Approved
USCG Approved
MEA Listed
ECS-500™ psi Clean Agent Suppression System with 3M™ Novec™ 1230 Fire Protection Fluid
The ECS-500 psi Clean Agent Suppression System is the newest entry in our engineered clean agent suppression product line. The higher pressure (500 psi/34.5 bar) of the ECS-500 with 3M Novec 1230 Fire Protection Fluid provides superior system performance as compared to 360 psi/25 bar systems. Now you have the flexibility of a mid-tier solution between our standard ECS™ and Advanced Delivery System (ADS™) to meet application size and design requirements at the ECS 360 psi price.
.png "Clean Agent Fire Suppression Systems FM-200™ HFC-227ea")
Benefits:
New 1,100 lb. cylinder reduces cylinder quantities and installation time required while providing enough agent to cover up to a 27,000 cubic feet area with a single cylinder
Increased system pressure allows for longer pipe runs and use of smaller pipe diameters
Provides flexibility to remotely locate cylinder storage area more than twice the distance the hazard area when compared to 360 psi/25 bar systems
Can be used with existing 4.0 HASP Key flow calculation software
Technical Specifications Clean Agent Fire Suppression Systems FM-200™ HFC-227ea
Easy to design using our engineered series software including pressure vent calculation
High performance system
Listing & Approvals
cULus Listed
FM Approved
USCG Approved
Other marine- and land-based approvals in process
Please refer to unburnt equipment provided by Dong Nam... HERE
You can refer to the manufacturer for more information....HERE
You will receive a quote from us as soon as possible..
Related products
Have 0 comment, evaluate about Clean Agent Fire Suppression Systems FM-200™ HFC-227ea
TVAdministratorsAdministrators