Cardox® Low-Pressure CO2 Fire System

Manufacture: kidde
Product code: Cardox® Low-Pressure

The CARDOX Low-Pressure Carbon Dioxide (LP CO2) System is a proven solution when used to protect areas that require multiple suppression cycles, expansion capabilities, numerous hazards or more than 5000 lbs of CO2.

Zalo

Consulting hotline: 0944934114
Product information

CO2 is an odorless, colorless, inert gas that extinguishes fire primarily by diluting the oxygen that supports combustion. It is applied by either the “total flooding” or the “local application” method. CO2 is not recommended for normally occupied spaces, except when other means of fire protection are not effective.

Total flooding delivers CO2 an enclosure until the fire is extinguished. For open hazards, the CO2 local application method blankets the hazard extinguishing the flames and cooling the hazard.  In “total flooding”, the enclosure of the hazard protected is flooded to a proper concentration. In “local application”, CO2 is directly applied in the proper amount at the rate required to cover the protected hazard.

Cardox® Low-Pressure CO2 Fire System

We have the expertise and product line to protect a full range of hazards with vertical and horizontal storage tanks ranging 2¾ ton to 60 ton and are available in 120, 220, 380, 460 and 575 volts, 50/60Hz, single and three-phase variants. Optional CSA and PED approved systems are also available.

Features

Fast-acting, within seconds CO2 penetrates the entire hazard area to smother the fire.

Less expensive to replenish than other agents.

Does not require hydrostatic testing.

Leaves no residue, eliminating the need for a time-consuming and costly clean-up

Effective on a wide range of flammable and combustible materials in both surface and deep-seated fires.

Allows for multiple hazard protection a common piping system.

Technical Specifications

Addresses hazards with partial enclosures or unenclosed equipment

Compensates for continuous air handling process

Suitable for extreme temperatures

Horizontal or Vertical Installation

Allows for multiple and extended discharges

Variety of standard/stock refrigeration packages available

Listing & Approvals

FM Approved

Why Choose Kidde Fire Systems?

We are a leader in the fire protection industry. We have innovated many products and extinguishing system design techniques. We offer High-Pressure CO2, CARDOX Low-Pressure CO2 and ECS Clean Agent fire suppression systems. Our full line of conventional and addressable electronic control panels finish the package to provide a complete system solution.

Our network of certified personnel and best-in-class distributors have the training, experience and technical skills to provide you with all of the services needed to keep your property protected. We offer the following services: application engineering; inspection and testing; emergency repairs; hazard analysis; NFPA upgrades; safety, maintenance and operation site procedure; venting analysis; room integrity testing and more

CARDOX LP CO2 Features:

Fast. Within seconds, CO2 penetrates the entire hazard area to smother the fire before it can develop a costly event.

Economical. Low-Pressure CO2 is less expensive to replenish and requires a smaller footprint for agent storage. Multiple discharges of system are possible without switch over to the reserve.

Low Maintenance. Low-Pressure CO2 systems do not require hydrostatic testing... ever. Fill connections are easily accessed without the
involvement of plant personnel. The liquid-level gauge continuously monitors the amount of agent stored eliminating the need to verify weight.

Clean. CO2 leaves no residue, eliminating the need for a time consuming and costly clean-up. Additionally, CO2 is electrically non-conductive and does not cause spoilage of organic materials.

Efficient. CO2 vapor chokes off combustion quickly. In a Low-Pressure system, reserve supply is obtained without complicated manifolds or valves.

Environmentally-Responsible. CO2 is a basic element of the atmosphere and a naturally occurring by-product of combustion. Its use has no long-lasting environmental impact.

Adaptive. CO2 is effective on a wide range of flammable and combustible materials in both surface and deep-seated fires. Low-Pressure systems allow multiple hazard protection a common piping system.

Applications for CARDOX Low-Pressure CO2:

• Automotive Industry

• Cement Plants

• Coal Handling, Grinding and Storage Systems

• Fume Handling Systems

• High Voltage Switchgear Buildings

• Industrial Fryer Process Lines

• Manufacturing and Industrial Processes

• Power Generation Enclosures

• Printing Applications

• Rolling Mills and Metal Processing

• Warehouses and Flammable Materials Storage

Please refer to unburnt equipment provided by Dong Nam... HERE

You can refer to the manufacturer for more information....HERE

Xem thêm
Rút gọn
Frequently asked questions

You will receive a quote from us as soon as possible..

Have 0 comment, evaluate about Cardox® Low-Pressure CO2 Fire System

Welcome, honored guests. Please leave a comment, we will respond soon
Reply.
Sender information
Comment
Click here to rate
Sender information
Product portfolio
Online support
0.13126 sec| 4333.766 kb