When to use Batteries Model HSA-300 and HSA-300-W
This device is a photoelectric smoke alarm
⭐ Using photoelectric technology, it is more sensitive in detecting slow smoldering fires that emit smoke light, less heat and can smolder for hours before This smoke alarm does not contain any radioactive material. Smoke alarms should be installed in every room (except bathroom and kitchen), finished attic and basement, ensuring that everyone at home will be able to hear and answer the alarm sound
Standard Features
Photoelectric sensor provides quick feedback on smoldering smoke, wood or fireplace
Test button and LED indicator to allow simple verification of battery operation and alarms
Beep alert - sounds when the alarm needs a replacement battery
Using modern photoelectric sensor
Large 85 Decibel alarm to warn you of danger
Hidden function to reduce unwanted alerts
Easy installation
Low maintenance
Complies with EN 14604 (BSI tested)
Specifications |
Model HSA-300 (Standard) |
Model HSA-300-W (Future) |
Electricity |
3.6 VDC (Pin Lithium-Ion) |
|
Battery life | up to 10 năm | up to 5 năm |
Quiet stream | 2uA | 5uA |
Status indicator | Red LED blinks every 40 seconds | |
Alarm | 50mA | 65mA |
Alarm status indicator | Red LED blinks every 0.5 seconds | |
Alarm sound level | > 85dB @ 3 mét | |
Low battery warning | One beep, synchronized with silent status indicator, for 30 days | |
Timeout (Alarm Status) | 9 minute | |
Hush Indicator (Alarm Status) | Red LED blinks every 24 seconds | |
Wireless connection of operating equipment | Do not apply | 433 MHz |
Number of connected devices | Do not apply | unlimited |
Standard | EN 14604 | |
Box size | 140mm Ht. x Length 105mm x Width 45mm | |
Weight | 120g (170g with box) | |
Temperature | 0 to 55°C | |
Hemidy | 10 to 95% RH, Non-condensing |
You can refer to products genuine fire alarm equipment...HERE
You will receive a quote from us as soon as possible..
TVAdministratorsAdministrators