Infiltration extinguishing agent 1 percen

Product code : 1 percen

Green Water-F1 (Green Water-FireOne) is a 1% infiltration fire extinguishing agent developed to suppress Class A fires (general fires). Green Water-F1 is used to quickly extinguish fires and remove or cool the embers of fires in the abyss with firefighting equipment and backpack pumps in the event of coal fires, house fires, tire fires, forest fires, etc. In suppressing spilled oil fires, Green Water-F1 suppresses fires by emulsifying and encapsulating oil components that cause fires.

Consulting hotline: 0944934114
Product information
item Detail
Concentration used 1%
operating temperature -10℃ ~ 30℃
applied fire General fire and spilled emulsifier, latent heat and abyssal fire
Harmful fluorine ( PFOS, PFOA ) non-detection
Surface tension ( 20 ℃ ) ≤ 20 mN/m

Infiltration fire extinguishing agent for special combustible fires such as coal fires

Excellent penetration, adhesion and cooling power compared to existing infiltration fire extinguishing agents with a surface tension that is three times lower than that of water

Excellent penetration and extinguishing power against Class A fire (paper, wood, cushion, etc.)

It is a neutral fire extinguishing agent and can be used even at -10℃

Snowfoam - Comparison with CAF1

Protuct Snowform - CAF1 Greenwater - F1
classification Infiltration extinguishing agent 1% Infiltration extinguishing agent 1%
applied fire General fires and spilled emulsifiers
Latent heat and abyssal fires
Coal Fires, General Fires and Spilled Emulsifiers
Latent Heat and Abyssal Fires
formulation large amount of bubbles In liquid form, penetration, permeation, emulsification, cooling action
Usage

Generates a large amount of air bubbles and is used for CAFS (Compressed Air Foam System) and firefighting equipment

Products capable of suppressing abyssal fires and forest fires

Block fire source and suppress fire by spraying liquid-type products through firefighting equipment, spraying device, and backpack pump, etc.
Fire suppression principle

When vegetable surfactants are used as the main component, a dense bubble layer is created to suppress general fires and spilled oil fires by blocking oxygen the cause of fire with suffocation and cooling action.

Suppression of general fires by penetrating and cooling combustion bodies with low surface tension

Suppression of spilled oil fires through the encapsulating effect of complex surfactants

caution Infiltration extinguishing agent 1%

Do not mix with fire extinguishing agents of other systems.

Pay attention to the operating temperature range and avoid direct sunlight.

Storage containers and tanks must be sealed to prevent inflow of foreign substances the outside.

packaging Infiltration extinguishing agent 1%

1,000L, 200L Drum, 20L Pail (PVC or chemical drum)

certification Infiltration extinguishing agent 1%

Korea Fire Industry and Technology Institute (KFI) type approval

Greenwater - MISTinfiltration extinguishing agent

Firefighting water addition type infiltration fire extinguishing agent

Application of water mist and sprinkler fire extinguishing system

ESS (energy storage system for electric vehicles, etc.) can be used for fire suppression

When 0.2% ~ 1% is added, water extinguishing performance for general fire and oil fire suppression is improved.

Greenwater - ESSinfiltration extinguishing agent

Extinguishing agent for fire suppression of electric vehicle, solar power plant energy storage system (ESS)

Viscous gel type fire extinguishing agent

Used for car body and power generation storage device where fire occurred

Xem thêm
Rút gọn
Frequently asked questions

You will receive a quote from us as soon as possible..

Have 0 comments, reviews about Infiltration extinguishing agent 1 percen
Welcome, honored guests. Please leave a comment, we will respond soon
Reply.
Sender information
Bình luận sản phẩm
Write a comment
Product portfolio
0.28301 sec| 4015.836 kb