HFP AP-1ASNS,C w Loop Control Panel 16 Zones with Network Card
The HFP AP-AS is a powerful and versatile analog loop or two Addressable fire control panel. The HFP AP-AS supports the Hochiki ESP loop driver, all of which are capable of delivering up to 400 milliamps of current loop for the most demanding applications. The built-in 3-pin power supply and temperature-compensated battery charger provide ample power for standard two, 1 Amp audio outputs, loop-powered audio, and other devices. The HFP AP-AS is also available as an HFP AP-ASL version providing a very cost effective solution for smaller standalone installations requiring only one detection loop. The HFP AP-ASL version does not support the following: Second Loop, Printer Output, Networking and Connections of the I/O Board or HFP AP-CRL Repeater.
Parameter
Construction of 1.2mm . mild steel plate
IP rating IP30
Epoxy paint finish Color - BS 00 A 05 lid & box gray - fine texture Color - RAL 7047 panel & labels light gray - satin
Weight 6kg (standard board)
Display of 8 lines of 40 characters graphic LCD
Mains voltage 110 or 230V AC 50 or 60 Hz. (Specify when ordering, default is 230V)
Main supply fuse 1.6A 250V
DC power supply rated 24V 3 Amps
Provides 24V Unified AUX at 500 milliamps
Maximum battery size 9Ah 12V (2 per board) (non-networked)
30V DC1 Amp . fault contact rating
Fire contact rating 30V DC1 Amp
Rated alarm contact 30V DC1 Amp
Sounder output rating
Fusion at 1 Amp
400 milliamp detection loop
Dimensions (mm) 385 x 310 x 90
TVAdministratorsAdministrators