Detnov DOD-220A-I Addressable Isolated Optical Smoke Detector
Optical smoke detector with integrated isolator for analog systems
✔️combining verification algorithms and dirt compensation, status LEDs and outputs for anti-theft or remote control systems, anti-theft systems ( Z-200 only) White , Requires Z-200 or Z-200-H docking station. Certificate of CPR EN 54-7 and EN 54-17. Dimensions: 100mm x 40mm
Featured
o Sleek design, low profile
o Dust compensation
o Anti-dirt and anti-insect net
o Non-polarized 2-wire connection
o Remote pilot output
o Compatible with any Detnov analog console
o Certificate of CPR EN 54-7 and EN 54-17
o Directions 1-250 on detour or DOD-220A-I with isolator. Connection respecting polarity
Application
The DOD-220A and DOD-220A-I detectors are specified for installation of fire protection in premises where a flame will generate more smoke than heat, or in premises where temperatures are normally high. based on its performance.
Specifications
Working voltage: Consumption in standby mode: Consumption in alarm: |
22 to 38VDC <300 μA <11 mA |
Base | 2 x 1,5 mm2 |
temperature | -10ºC đến 70ºC |
Humidity | 95% |
Class IP | IP40 |
Detector (Diameter x height) | 42 mm x 100 mm |
Base (diameter x height) | 5 mm x 100 mm |
Structure | ABS |
Certifications | EN 54-7 y EN 54-17 (DOD-220A solo EN 54-7) |
Certificate No. DOD-220A FEMALE Certificate No. DOD-220A-I FEMALE |
0370-CPR-0881 0370-CPR-1859 |
Size
Please see similar products….HERE
TVAdministratorsAdministrators