DCP-DIMM 2-input monitoring module ,Addressing module
DCP-DIMM 2-input monitoring module | Address module @@@ Two monitoring inputs @@ 127 devices can be used on each Loop Hochiki addressable fire alarm device, Hochiki fire alarm panel, Hochiki fire alarm panel, Contact for advice 24/7 technical: 0917911114
Highlights DCP-DIMM 2-Input Monitoring Module (Address Module)
· Two monitoring inputs
· Fast, reliable monitoring connection using DCP Hochiki (Digital Communications Protocol) protocol.
· 127 devices can be used per Loop
· LED color indicator for module status
· Can be programmed to monitor normally open (NO) or normally closed (NC).
・Type A or B connection
· Allows wiring up to 14 AWG wire.
Specifications
Power Supply (S-SC) 25.3 ~ 39 VDC
Power Consumption 600μA (Typical) 720μA (Alarm)
Number of inputs programmable 2 independent monitoring terminals
End-of-line resistance 22K ohms
Maximum number of devices 127
Dimensions 4.2”W x 4.7”H x 1.4”D
Working Temperature 32°F (0°C) ~ 120°F (49°C)
Installation box 4” electrical box
Relative humidity 90% RH non-condensing
You can refer to products genuine fire alarm equipment...HERE
TVAdministratorsAdministrators