Dau Bao Khoi address FDKU012-PSA
Photoelectric Smoke Detector (FDKU012-PSA) is an analog/addressable smoke detector compatible with any Integlex Multicrest series fire alarm control panel, the FDKU012-PSA is a low profile smoke detector with wide sensitivity range. , Detector and base (not included) are made of a durable plastic that is eggshell white (pale white) to blend in with the ceiling. The FDKU012-PSA has a sensitivity range of 3.4 to 12.0%/m （1.05 to 3.82% per foot） and is UL and cUL listed. The FDKU012-PSA can be configured for drift compensation and also has a built-in dirty detector alarm. The FDKU012-PSA and control panel communicate via a robust and proven digital communication pipeline and device-specific alarm level analysis system. The total polling rate is less than five (5) seconds, as required by UL.
Featured
• Low profile, less than 2 inches with base
• Wide dynamic range 3.4 to 12.0%/m 1.05 to 3.82%/foot）
• Analog True . probe
• UL . Listed Smoke Calibration and Sensitivity
• Optional Lock tab to prevent unwanted deletion
• Simple and precise address setting without mechanical switches
• LED light for 360° . viewing
+++ Model no. FDKU012-PSA
The FDKU012-PSA has an air velocity rating in the open guard zone 0 to 91.4 m (300 feet) per minute.
The FDKU012-PSA is UL/ULC listed on a maximum distance limit of 9.1m (30 feet) on smooth ceilings. Refer to NFPA 72 for specific information on detector range, location, and special applications.
Specifications
| No | Item | Specifiactions |
| 1 | Operating voltage | 22.0 to 24.0V |
| 2 | Standby current | 250 µA |
| 3 | Indicators Alarm | 2 LEDs |
| 4 | Warning Indicators | 1.2 mA D.C. |
| 5 | Warning point range | 3.4 to 12.0 %/m (1.05 to 3.82 %/foot) |
| 6 | Working temperature | 0°C to 49°C (32°F to 120°F) |
| 7 | Humidity | 0% to 93% (no condensation) |
| 8 | Start-up time | 1 second max. |
| 9 | Color | WHite |
| 10 | Weight | 84g (2.96 oz) |
| 11 | Dimension | Height: 34mm (1.33 inch) Diameter: 99mm (4.0 inches) |
Address setting
Each addressable module, smoke detector, heat detector and combined detector must have the address set before connecting the device to the Signal Circuit (SLC) loop. The address is set using the handset programmer or the addressing feature on the control panel.
Please see similar products….HERE
TVAdministratorsAdministrators