CHQ-SOM, Hochiki 1 Output Module
The CHQ-SOM has been designed to allow a single relay output to be connected to the ESP loop The combined device with a volt-free relay contact can be configured as N/O or N/ C, relay contact rated at 30 VDC (max), 1 A (resistive load) CHQ-SOM has three color coded leads, it also has a wire terminal block for loop connection repeat. NOTE: To maintain LPCB approval, the device must be mounted in an SMB-1 enclosure (or equivalent enclosure made of polycarbonate or similar material that is impact resistant in accordance with EN54-18:2005 5.9) incorporating With the plate SMB-ADAPTER, use two M3 screws or two M3 nuts and bolts.
- Includes a supervised output
- Small design to simply provide supervised output the ESP . loop
- Fly guide for easy installation
- Address with Handheld Programmer TCH-B200
- Approved by LPCB
You can refer to products genuine fire alarm equipment...HERE
TVAdministratorsAdministrators