Conventional fire alarm systems vs. addressable fire alarm systems
- Two types of fire alarm systems commonly found in commercial buildings are addressable systems and conventional systems. The main difference in these two systems is how the field devices communicate with the fire alarm panel.
- Conventional systems were the first fire alarm system that came to the market. Addressable systems are newer and more advanced.
Wiring
- Conventional systems have zones on them, which are basically just circuits. Conversely, the fire alarm panels of addressable systems actually communicate over a communication circuit with each individual field device.
- In other words, with addressable systems there is one wire that connects all devices to the fire alarm control panel whereas with conventional systems there is a different wire for each device and each wire connects to the fire alarm control panel.
- As a result, addressable systems require less cabling than conventional systems since each detector has its own unique address.
Location detection
- With conventional fire alarm panels, there will be multiple devices on a zone, so if any of the devices on that zone go into alarm, you’ll get an alarm at the panel that will say “Zone Alarm.” It will also tell you what zone, as they’re numbered. This means that if an alarm comes in, it will tell you the area of the building that the alarm is in, but not a specific location since it could be any of the devices on that circuit. You would then have to walk around in that area looking at the devices to try and determine which one caused the alarm.
- Addressable systems allow you to set an address on the field device, normally a 3-digit number, and then tell the panel what and where that device is located. If you get an alarm, you will see something like: “Alarm Smoke Detector (Address: 023) 1st Floor Hall at Room 102.” These systems will provide a specific location where the alarm and what type of device caused the alarm. This is a big help in response times for the fire department or the customer. It also gives you the ability to individually program each device so if you have one smoke detector and one duct detector right next to each other, you can program one to send an alarm and the other to just send a supervisory and not set of the horns and strobes. On a conventional panel, every device on the same circuit would report the same.
- The fire alarm control panel on an addressable system receives information and status reports from each device and indicates its exact location if there is smoke or fire.
Cost
- Conventional fire alarm systems cost less to purchase but actually cost more to install due to the extensive wiring involved with these systems. It takes more time and more wires to install conventional systems.
- Addressable fire alarm systems are more advanced from a functionality standpoint but cost less to install. Addressable systems can also be more cost-efficient in the long run when you consider the accuracy of these systems at detecting fires and therefore preventing fire damage. These systems are also less likely to signal false alarms, a costly mistake.
Functionality
- Looking at pure functionality, addressable fire alarm panels are simply more advanced and therefore allow for more control and flexibility. These types of systems are even known as “intelligent” fire alarm systems. They are also more reliable than conventional fire alarm panels when it comes to false alarms.
- This isn’t to say that conventional fire alarm systems are not effective; just in some ways limited when it comes to the scope of protection they can offer.
What type of fire alarm system is right for my building?
Conventional systems are still used for very small applications or for customers who don’t want to upgrade, but they have serious limitations as to their abilities to protect larger buildings. Addressable systems are generally “safer” systems as they have to ability to decipher and communicate more detailed information to the control panel, and therefore increase speed and accuracy of fire extinguishment. First responders need as much as information as possible when responding to a fire alarm. Addressable fire alarm systems provide the exact location of a fire in a building, which can save lives, time, and money.
TVAdministratorsAdministrators
Welcome, honored guests. Please leave a comment, we will respond soon