Unipos VIT02 Router
The VIT02 router performs the functions of a repeater (retransmission of radio signals in the network) and controls a conventional sounding device or a fire alarm and alarm device, through a programmed relay output.
PRODUCT DESCRIPTION
The VIT02 router performs the functions of a repeater (retransmission of radio signals in the network) and control of conventional sounding equipment or fire alarms and alarms, through a programmed relay output. It is powered by 220 V/50 Hz AC and has a space for a backup battery (not included), which aids its operation in the event of a fault in the external power supply. Specifications - Supply voltage:
- Mains power: 220/230V (50/60Hz)
- Battery backup:
- Backup battery type: lead, gel electrolyte
- Nominal voltage / capacity of backup battery: 12 V / 1.2 Ah
- Discharged battery voltage : 9 V DC
- Charging battery voltage: 14 V DC
- Consumption when supplying internal backup battery: <60mA max
- Maximum value of Working Mode at 12 V
- Power output: 1 pc
- Voltage: 24 (+2 / -4) V DC
- Maximum current value: 400 mA Monitored output under fire conditions: 1 pc
- Type: potential
- Electrical characteristics: 24 (+2 / -4) V DC
- Sign of registered events
- Light indicator: LED (yellow, green and red LED)
- Cross section of connection wire: (0.8–1.5) mm2
- Response time: 30 seconds.
- Degree of protection: IP50
- Operating temperature range: minus 10oC to 55oC
- Resistance to relative humidity (no condensation): 95%
- Overall dimensions (not including antenna): (130 170 х 80) mm
- Weight, excluding spare batteries, no more: 0.400 kg
You can refer to products genuine fire alarm equipment...HERE
TVAdministratorsAdministrators