Unipos FD7150 address emergency push button
Unipos FD7150 Addressable Emergency Push Button is designed for indoor installation as part of the IFS7000 series, Addressable Fire Alarm System. This device is compliant with the requirements of European Standard EN54-11:2001 / A1:2005, EN54-17:2005 /AC:2007.
PRODUCT DESCRIPTION
- The FD7150 manual call point is designed for indoor installation as part of the IFS7000 Addressable Fire Alarm System series. This device is compliant with the requirements of European Standard EN54-11:2001 / A1:2005, EN54-17:2005 /AC:2007.
- The FD7150 manual call point has a built-in short-circuit isolator for the signal loop. The communication between the addressable manual call point and the Console is based on the native UniTalk protocol. The LED indicator provides the following status information:
- Working mod
e - LED light ?? ashes right in a 16 second period;
- Alarm status - LED ?? ash with constant light;
- Short circuit isolator activated - LED ?? ash for 1 second.
SPECIFICATIONS:
Supply voltage: (10-30) VDC current in idle state: <390 amperage
Current in alarm state: (3 ± 1) mA
Electrical installation: Via terminal to connect wire with cross section (0.5-1.5) mm2
Protection level: IP 40
Operating temperature range: minus 10° to plus 55°С
Relative humidity: (93 ± 3)% at 40°С Size: 98 96 51 mm
Weight of manual call point: 0.150 Kilogram
You can refer to products genuine fire alarm equipment...HERE
TVAdministratorsAdministrators