Tyco HV17 Mist Head,Open Nozzle
Tyco HV-17 Mist Nozzle Open Head Tyco HV-14 Nozzle Open Head Meet UL and FM Standards K 2.8 Prestige 100% genuine Tyco Delivery to your place Contact 0917911114
Tyco HV17 Mist Head introduction video-Open Nozzle
The Tyco HV17 Mist Head,Open Nozzle is opened (Not automatic) directly to the nozzle and has a built-in dust filter. They are designed for use in fixed mist systems used for fire extinguishing systems requiring high speed such as for the protection of flammable liquids. HV Type Direct Nozzles have heads Garbage filters are an integral part of standards that require nozzles to include a pre-filter, nozzles with a hole diameter of 3/16 inch (4.8 mm) or less. Available in either brass or stainless steel, the six HV nozzle models offer a wide range of hole sizes and distribution characteristics.
Tyco HV17 Mist Head,Open Nozzle water passes through the internal vortexes, a vortex is generated before discharging the water through the holes of the nozzle. The result is a cone of water when discharged over a defined area, this type of nozzle uses high velocity mainly, used in sprinkler systems to protect against fixed hazards such as: Transformers, circuit breakers, diesel engines, diesel engines and tanks, circuit breakers, lubricating oil systems, boiler oil, and similar hazards. They are capable of quickly extinguishing oil fires by emulsifying, cooling, and not sealing. The nozzle's high velocity cooling surface effects also minimize the possibility of ignition after extinguishing. It is recommended that the end user consult with regard to the suitability of the building material for any corrosive environment. The effects of ambient temperature, chemical concentration, and gas/chemical velocity should be considered, to a minimum, along with corrosive substances to which the nozzle may be exposed.
TVAdministratorsAdministrators