Special Unidirectional Tyco Nozzle TY3180
Special injector line BB1 K-factor 5.6 Quotation for MF200 system Advice on installation of FM200 fire fighting system 100% Tyco brand Long-term warranty Hotline 0917911114 for quotation and technical advice
The Special Unidirectional Tyco Nozzle TY3180 belongs to the BB1 series of quick-response special nozzles with a flow rate of K=5.6. They are used in attic applications such as workshops, providing cost savings by reducing the number of nozzles and branch lines compared to systems using standard nozzles.
Specifications of Tyco Special Unidirectional Nozzle TY3180
- Meet standards: UL, C-UL - Spray flow: K=5.6 GPM/psi½ (80.6 LPM/bar½)
- Nozzle size: 1/2 inch NPT (DN15).
- Size of glass tube: 3mm
- Minimum distance between nozzles: 4 ft (1.2 m)
- Maximum distance between nozzles: 6ft (1.8m) Trigger Temperature: 212°F (100°C) The BB1 TY3180 injector consists of two narrow directional plates long on either side with the aim: reaction time is reduced with the placement of nozzles no more than 6 ft (1.8 m) and spray can be concentrated in both directions with each nozzle. horizontally oriented up to 30 ft (9.1 m). - Not only are TY3180 used in anti-cutting walls or attic space partitions, but they are also used oriented panels parallel to the outer wall in the attic side, roof. - Nozzle TY3180 (BB1) used with attic slope, roof 10:12 (83%) to 12:12 (100%) This type of nozzle has a brass finish and is activated by a glass tube.
You can refer to products genuine fire alarm equipment...HERE
TVAdministratorsAdministrators