The flexibility of a fire pump is shown in the fact that whenever a sudden fire incident occurs, the machine is always ready to operate. However, because it is a machine, it cannot avoid problems, this affects the progress of work when there is a fire, so you need to know the causes of problems with the fire pump. to have a timely solution plan.
1 Rust appears on the fuel fire extinguisher
- After a period of time, the fire pump was used but was not cleaned properly, leading to a situation where the equipment rusted and this rust fell to the bottom of the fuel tank. This leads to clogging, the fire pump does not explode and explodes unevenly when started.
- In addition, it is also due to the fact that the fire pump after a period of use is not shielded according to standards, leading to reduced working performance.
- Along with that, you use a water source contaminated with alum, leading to alum forming into large patches inside the pump, leading to obstruction of the pump impeller and sluggish operation. So you need to pay attention to this cause to fix the rusty ball pump error. 2.Fire pump discharges and absorbs water poorly
- Regarding the cause of the fire pump's poor water suction, the cause may be because the pump's filter is clogged with dirt, or the suction head is too high, or the suction pipe is too close to the water surface
. - Regarding poor water discharge, first pay attention to the suction height, it may be because it is too high, the suction tube is not up to standard and is too long, or the position of the suction stabilizer is loose..
. - The location of the luppe is blocked by trash, causing a blockage during the pump's suction process, which in turn leads to some small sand and soil running into the suction line, causing the fan to get stuck when it operates.
3. The fire pump emits a lot of smoke and the engine core is locked
The lubricant in the engine is no longer greasy, causing the parts to start to wear and the residue from the metal parts is worn away from the equipment, leading to friction of the parts, making the machine hotter. . The phenomenon of the machine emitting a lot of black smoke and white smoke is due to the pump silver being exposed and the piston having difficulty exploding.
Above are some problems that often occur with new fire pumps. To always have a good machine, come to Pccc Dong Nam, we have dedicated guidance for you to always protect your fire pump.
TVAdministratorsAdministrators
Welcome, honored guests. Please leave a comment, we will respond soon