NOHMI FIRU007,LED remote fire alarm auxiliary display cabinet
The FIRU007-LED is an LED remote fire alarm for the Integlex Multicrest
™ S508 fire alarm control panel , The FIRU007-LED communicates using an RS-485 connection to the main control panel providing a general indication of warning, monitoring , Failure and other system status and control functions. FIRU007-LED has 14 L.E.D., front panel with LEDs for power conditions , Alarm, monitoring, Incident and Silence. It can be mounted on a standard 2 gang electrical box or a standard 4" square electrical box. The keypad works only when the key lock security switch is set to the allowable position.
• Compact and lightweight unit
• 14 zone status indicators
• 6 system control switches
• Key lock switch to protect system control switch operation
• Built-in buzzer
• Red
• Easy to install
Specifications
| No | Item | Parameter |
| 1 | Maximum voltage current 24 VDC | 75 mA |
| 2 | Working environment temperature | 0°C to 49°C (32°F to 120°F) |
| 3 | Applicable baud rate RA-bus | 2400, 4800, & 9600bps |
| 4 | Wire connection type | NFPA class B (type 4) |
| 5 | Maximum remote reporting | 31 |
| 6 | Connect remote reporting | RS-485 |
| 7 | Uses | NEMA-1(indoor use) |
| 8 | Diameter | 150mm (5.91 inches) (H)× 178mm (7.01 inches) (W)×38.2mm (1.50 inch) (D) |
| 9 | Installation voltage box | 64mm (2-1/2 inch) deep 2-gang box North America Standard 4-inch square box 38mm (1-1/2 inch) deep box |
Wiring diagram
- The FIRU007-LED is connected to the S508 FACP using a four-wire RS-485 connection. Connections are power limited and monitored. Up to Thirty-one (31) remote alarm devices can be connected with Class B (Type 4) wiring.
- Example of wiring FIRU007-LED Class B
Set the notification address
1) Turn on switch 1 of Dip Switch S1, then input 24 VDC to TB1.
2) FIRU007-LED LED screen display as follows.
Please see similar products….HERE
TVAdministratorsAdministrators