MAD-421-I module with built-in isolator Addressable 1 output 1 input
Analogue control and monitoring module with built-in isolator
✔️has 1 monitored engineering input to signal the status of the device providing us with NC or NO contact and 1 relay output no voltage supply contact C, NO, NC cannot reset, It occupies two addresses on the loop. Live feed the loop. Includes status LEDs. Connection via removable strips up to 2.5mm2 cross section, possibility of mounting on a DIN rail or flat wall mounting in a BOX-ONE box. Consumes less than 300μA at idle. Red. Dimensions 100 x 82 x 23 mm. Certified CPR EN 54-18 and EN 54-17.
Descriptions MAD-421-I module with built-in isolator Addressable 1 output 1 input
°Easy to install, allows mounting to surface or DIN rail
° Non-polarity support (MAD-421 and MAD-422 only)
° Addressable by programmer Live loop feed
°Connection via removable, easy-to-connect strips
° CPR certificate EN 54-18 and EN 54-17
Specifications MAD-421-I module with built-in isolator Addressable 1 output 1 input
Loop feature: Working voltage: Consumption on standby: Consumption in alarm: |
22 to 38VDC <300 µA <3 mA |
Relay connection | 1 A @ 30VDC |
Working temperature | 10ºC to 70ºC |
Humidity | 95% |
Protections class | IP40 |
Size | 100 mm x 100 mm x 23 mm |
Structure | ABS |
Certifications | EN 54-18 and EN 54-17 no 0370-CPR-1863 |
Size MAD-421-I module with built-in isolator Addressable 1 output 1 input
Please see similar products….HERE
TVAdministratorsAdministrators