HD IG and IS Foam Mixer,Southeast Fire Protection Equipment District 10

Product code : IG & IS

HD IG & IS Foam Mixer is a foam fire protection device provided by Dong Nam Company Similar to HD87 Foam Full Set 100% genuine  Made of copper and stainless steel with high durability Contact Contact 0917.911.114

Consulting hotline: 0944934114
Product information

Detailed description of the HD IG & IS . Foam Mixer

The HD IG & IS Foam Mixer is used to produce foam concentrate liquid in the water stream to deliver the solution in proportion of the concentrate liquid and water, to the foam production equipment. The inductors are primarily designed for use in fixed foam installations to provide a simple and reliable method of scaling in constant flow applications. Each inductor is designed for a predefined water pressure to give the correct ratio at that pressure and discharge rate. An increase or decrease in inlet pressure will result in an increase or decrease in flow rate, which in turn will change the ratio.

pecification of HD IG & IS . Foam Mixer

The materials are available in three different construction materials, wide flow range 75 to 3500 liters per minute at inlet pressure between 6.4 and 12 bar as shown in the chart. Each inductor is precisely factory-calibrated to match the flow, pressure and inductance requirements of the system. This allows accurate performance to be guaranteed and achieved.

To the inductor size, use the following formula:

Q = K P

Q = Total solution flow rate in liters/min.

K = Inductor constant

P = Inlet pressure in kg/sq.cm.

Example: To find K-Factor

Q = 200 LPMP = 8,0 kg / sq.cm.

K = 200 ÷ 8

K = 70,71

This K = 70.71 is within the range of an inductor with a size of 65 NB. Therefore 65 NB inductors should be chosen.

Specifications of HD IG & IS . Foam Mixer

Model :IG/ Aluminum - IS/Stainless Steel

Aluminum, copper or stainless steel construction

Sizes 65, 80, 100 & 150 mm (2.5", 3", 4" & 6") with fixed flow rates 75 to 3500 lpm

Working pressure 6.4 to 12 bar (93 to 175 psi)

Maximum back pressure is 65%

Each unit is calibrated and factory tested for flow, induction speed at maximum back pressure

You can refer to products genuine fire alarm equipment...HERE

Xem thêm
Rút gọn
Frequently asked questions

You will receive a quote from us as soon as possible..

Have 0 comments, reviews about HD IG and IS Foam Mixer,Southeast Fire Protection Equipment District 10
Welcome, honored guests. Please leave a comment, we will respond soon
Reply.
Sender information
Bình luận sản phẩm
Write a comment
Product portfolio
0.60967 sec| 3996.672 kb