FD7203R output control module
FD7203R Unipos output control module for controlling external devices for IFS7000 Fire Alarm System via relay contact. Open or closed contact types are selected by jumper.
- FD7203R Unipos is attached to a plastic box for user convenience.
- Two isolators are available for short circuit protection - one in the signal circuit and one in the circuit. Both LED indicators provide information for the current status.
TECHNICAL SPECIFICATION:
+ Supply Voltage:
Signal loop: 15-30 VDC
Source loop: 12-30 VDC
+ Current consumption in working mode:
Signal loop: 300 μA
Source loop: 2 mA
+ Consumption stream at the output:
Signal loop: 3 mA
Electrical loop: Up to 1A
+ Relay output: 1 pc
Type: Potential Free, Nurt or NC
Electrical Specifications: 1A / 30VDC 0.5A / 125V AC
+ Voltage supply stability: 1 pc
Voltage: (12-30) VDC
Maximum current: 1A
+ Operating temperature range: minus 10ºС plus 55ºC
+ Relative humidity (non-condensing): ≤95%
+ Size: 92 x 50 x 26 mm
+ Weight: 0.062 kg
Signal loop: 15-30 VDC
Source loop: 12-30 VDC
+ Current consumption in working mode:
Signal loop: 300 μA
Source loop: 2 mA
+ Consumption stream at the output:
Signal loop: 3 mA
Electrical loop: Up to 1A
+ Relay output: 1 pc
Type: Potential Free, Nurt or NC
Electrical Specifications: 1A / 30VDC 0.5A / 125V AC
+ Voltage supply stability: 1 pc
Voltage: (12-30) VDC
Maximum current: 1A
+ Operating temperature range: minus 10ºС plus 55ºC
+ Relative humidity (non-condensing): ≤95%
+ Size: 92 x 50 x 26 mm
+ Weight: 0.062 kg
You can refer to products genuine fire alarm equipment...HERE
TVAdministratorsAdministrators