DynaShield ADSrm Surge Suppression

Product code : ADSrm-040

DynaShield
® ADSrm SPDs are designed to protect valuable commercial equipment. Power quality is more critical today than ever before and that means not just any surge suppression device can protect your sensitive electrical and electronic equipment.

Consulting hotline: 0944934114
Product information

Descriptions DynaShield ADSrm Surge Suppression

DynaShield® products are a cost-effective solution for any critical location in your facility high-risk sites, such as telecom & petroleum, to point-of-use equipment; such as laboratory devices, manufacturing equipment, and computers. With DynaShield® ADSrm surge protection devices installed, you can count on complete facility protection.

- All modes protection

- Weather resistant – perfect for outdoor applications

- Listed to UL 1449 4th Edition, Type 2

- 4 Modes of discrete protection

- Green status indicating lights per phase

- Individually fused MOV technology

- 5-year standard warranty

Applications DynaShield ADSrm Surge Suppression

- ALLTEC’s Protection Pyramid depends on DynaShield® products to support its comprehensive facility framework. The second tier of protection diminishes the significance of random high-energy, short-duration electrical power transients through properly installed surge protective devices. These occurrences are typically caused by atmospheric phenomena (such as lightning strikes), utility switching, inductive loads, and internally generated overvoltages.

- You can view typical installation locations in the application maps to the right by locating the numbers 5 and 6.

Specifications DynaShield ADSrm Surge Suppression

Model ADSrm-040
Connection Type Parallel Connected
Agency Listings Listed to UL 1449 4th Edition
Protection Modes Line-to-neutral, Line-to-ground, Line-to-line, Neutral-to-ground
Operating Frequency Range 50–60 Hz
Maximum Surge Current 40 kA per phase
Response Time < 1 ns
Status Indication Green LED
Enclosure Protection Level NEMA 4X, Plastic UL 94 V-0
Dimensions (H x W X D) 3.23” x 5.515” x 2.005”
Weight (Maximum) 1.7 lbs
Wire Connections Stranded #10 AWG
Operating Temperature 40° F to +140° F (-40° C to +60° C)
Operating Humidity 5% to 95% non-condensing

Please refer to similar products...HERE

Xem thêm
Rút gọn
Frequently asked questions

You will receive a quote from us as soon as possible..

Have 0 comments, reviews about DynaShield ADSrm Surge Suppression
Welcome, honored guests. Please leave a comment, we will respond soon
Reply.
Sender information
Bình luận sản phẩm
Write a comment
Product portfolio
0.11102 sec| 4007.547 kb