DTD-210A and DTD-210A-I, fixed temperature detector (58ºC-8ºC) addressable
Temperature detector (58ºC-8ºC/min) with built-in isolator for analog systems
✔️combined dirt compensation and verification algorithms ,Status LEDs and output for anti-theft systems or remote control, anti-theft system (Z-200 only) White. Allows installation without polarity, Requires Z-200 or Z-200-H connection base. Certificate of CPR EN 54-5. Dimensions 100mm x 40mm.
Featured o Sleek design, low profile
o Heat function for measuring temperature
o Fixed heat function at 58ºC
o Non-polarized 2-wire connection
o Remote pilot output
o Compatible with any Detnov Analog console
o Certificate of CPR EN 54-5 and EN 54-17
o Directions 1-250 on detour or DTD-210A-I with isolator. Connection respecting polarity
Application Fixed heat detectors DTD-210A and DTD-210A-I are specified for installation of fire protection in premises where the flame causes more heat than smoke, it is also specified for premises where smoke, steam, or dust frequently caused by their operations, such as industrial stoves, boiler rooms, locker rooms, and parking lots
Specifications
|
Working voltage: Consumption in standby mode: Consumption in alarm: |
22 to 38VDC <300 μA <11 mA |
| Connections | 2 x 1.5 mm2 braided and shielded connections with Z-200 . base |
| temperature | -10ºC to 70ºC |
| Humidity | 95% |
| protections class | IP20 |
| Detector (height x diameter) | 40 mm x 100 mm |
| Base (height x diameter) | 5 mm x 100 mm |
| Structure | ABS |
| Certifications | EN 54-5 y EN 54-17 (DTD-210A solo EN 54-5) |
| Certifications |
DTD-210A Nº certificado: 0370-CPR-0995 DTD-210A-I Nº certificado: 0370-CPR-1860 |
Size
Please see similar products….HERE
TVAdministratorsAdministrators