So to implement the 4 basic principles of fire prevention and fighting, what principles must we ensure? How to implement them, especially must be strictly followed to minimize damage in any fire or explosion situation. Therefore training is important
4 nguyên tắc cơ bản phòng cháy chữa cháy
1. Reduce the risk of fire in your workplace
- The principle of workplace safety is to remove the source of ignition before any harm is done. For example, plugging too many things into an outlet increases the chance of a fire because it can overload the circuit.
- Here are some other ways to identify potential fire hazards:
* Faulty or damaged wiring not detected in time
* Flammable objects should not be placed in a safe place
* Flammable objects near the ignition source Always check weekly for these potential fire hazards. If you notice any problems, notify maintenance immediately.
>>>>WHAT ARE THE REGULATIONS ON FIRE PROTECTION EQUIPMENT FOR FACTORY >>>>>
2. Monitor flammable rooms
- Another essential fire prevention tip is to focus your attention on areas that can easily start a fire. These areas often contain a significant amount of equipment or other flammable materials. Here are some of the most popular places to look out for:
* Bathroom or kitchen
* Electricity storage room
* Server room
* Laboratories If possible, always unplug any appliances you are not using as these objects could be a source of ignition if a spark occurs. In addition, keeping flammable things away from heat-generating equipment can cause a fire or explosion at any time.
3. Check and detect damage to the fire alarm and fire fighting system
- Sometimes, fires and explosions can break out even if you have followed workplace safety guidelines before. That's why it's so important to have a properly maintained fire detection and suppression system. For example, check that fire detectors are working and that fire extinguishers are working properly at least every two weeks
- Is there anything else you can do?
* Perform monthly testing to confirm that they are ready to operate at any time * Appoint an employee or person responsible for periodic inspection
4. Place emergency exit instructions in convenient locations
- A final tip on fire prevention is to ensure that emergency exits are clear and installed in convenient locations. Make sure they have adequate lighting and the exit map is visible to the whole office. Also, conduct monthly fire drills to ensure everyone knows where to go.
- Outline emergency evacuation plans, secure firefighting equipment, and declare safe firefighting work.
>>>>>Circular No. 06 2022 TTBCA, fire prevention>>>>>
TVAdministratorsAdministrators
Welcome, honored guests. Please leave a comment, we will respond soon